|
Automatic line for welding a grid of two bays TJK HW-WZD12
Characteristics:
Bays of different diameters can be installed at the same time on the bayonet holders. The machine can automatically select the desired size.
For example, fittings with a diameter of 6mm, 8mm, 10mm, 12mm are installed on 4 paper holders (coil holders for longitudinal and transverse).
Valves of different diameters with the help of the valve change system are automatically selected as needed. So time is saved and labor costs are reduced.
Longitudinal and transverse rods are in coils, they do not need to be straightened and cut beforehand, so more effectively and safely.
Cross bars can be removed on the front or back of the longitudinal bars using a transverse feeder.
Do not need a grid rotation system.
So the working space and time are saved, the efficiency of work increases.
Technical data:
Max. width of the mesh (length of transverse rods) 2, 800 [mm]
Max. length of the mesh (length of longitudinal bars) 6 [m]
The length of the longitudinal bars 100 [mm], freely adjustable
Step of cross bars 50 - 400 [mm], multiples of 50 [mm]
Diameter of longitudinal bars Φ5 - Φ12 [mm] (outside the coil)
Diameter of transverse rods Φ5 - Φ12 [mm] (outside the coil
Max. diameter of the welded bars Φ12 Φ12 [mm]
Welding speed 80-120 [cycles / min]
Air consumption ≥0.6Mpa, 3.5m3 / min
Cooling water consumption ≥0.2Mpa
|
