|
The right-bending machine WG16B (bending machine for reinforcing steel) has a special patented straightening system consisting of horizontal and vertical rollers, which can be adjusted automatically. 4. The pull rolls eliminate torsion, which is driven by the servomotor, provides perfect rectification accuracy.
The block for bending and cutting WG16B (bending machine for reinforcing steel), controlled by a servomotor, is equipped with turning and sliding bending pins.
After receiving the signal from the computer, the cutting unit begins to be cut out in an instant, ensures the clamping tolerance.
1) The correct-bending machine WG16B can handle more than 30 bends; Up to 500 different programs can be stored in the device memory
2) Correctly-bending machine WG16B (bending machine for reinforcing steel) should without pausing and stopping when processing yokes of any shape and angle of bending.
Features:
The front panel of the central machine can rotate and change the angle of inclination from 90 ° to 135 °.
2-a magazine holder with controlled brake
The maximum lifting capacity of each coil holder is 3000 kg. automatic brake system (pneumatics) and a buffer system. Emergency stop. The inside diameter is adjustable.
Correct bending machine WG16B (bending machine for reinforcing steel) has a special patented straightening system consisting of horizontal and vertical rollers, which can be adjusted automatically. 4 pull rolls eliminate torsion, which is driven by the servomotor, provides perfect accuracy of straightening.
The bending and cutting unit WG16B (bending machine for reinforcing steel), controlled by a servomotor, is equipped with turning and sliding bending pins.
After receiving the signal from the computer, the cutting unit begins to be cut out in an instant, ensures the clamping tolerance. For the WG16B bending machine, many electrical and pneumatic parts are imported from Japan and Germany, for example PLC, servo motor and gearboxes.
Used components - control electronics, servomotors, electrical companies:
PLC-Beckhoff (Germany)
servomotor-Yaskawa (Japan)
display-Samsung (Korea)
other electrical engineering Schneider
The option is possible with the use of high-quality and reliable components of Chinese production, which significantly affects the price reduction of equipment, while the equipment retains its quality characteristics.
Technical data:
Productive capacity
One rod Φ6 - 16 [mm]
Two bars Φ6 - 12 [mm]
Max. bending angle ± 180 ° [double direction]
Max. bending speed 1200 [° / sec]
Max. pulling speed 100 [m / min]
Diameter of central mandrels Φ20 - Φ42 [mm]
Max. bending side length (diagonal) 2500 [mm]
Min. bending side length 150 [mm]
Tolerance for length ± 1 [mm] Tolerance for angle ± 1 °
The average consumption of compressed air is 12 [l / min], ≥0.9Mpa
Average power consumption 10 [KW / H]
Electric power 68 [KW]
Voltage 380 [V] - 50 [Hz]
Total weight 5, 000 [Kg]
Dimensions 5400 * 1350 * 2700 [mm]
|
