|
Used stationary asphalt plant "Teltomat-80" in 2003 (Germany)
Plant parameters:
Date of production: 2003.
Replacement of the computer system: 2017 (New control system)
Full of those. Plant maintenance: 2017 (Repairs)
Standard production conditions and plant characteristics:
This asphalt plant is designed to produce a hot asphalt mixture of 80 tons / hour in a humidity of 3% and a finished product temperature of 160 ° C.
- Aggregate coefficient% 3
• The temperature of the delivered aggregate to the dryer is more than 10 º C
• Working height: sea level
• Approximately the density of the unit is 1, 650 kg / m³
• Fuel oil №: 6 calories 9, 200 kcal / kg
• Fuel oil №: 4 calories 9, 700 kcal / kg
• The value of diesel calorie is 10, 200 kcal / kg
• Calorific value of natural gas is 7, 600 kcal / kg
• Increase in the temperature of heated Δt 160 K
• Moisture content of the mixture% 0, 3
• Maximum. The cumulative grain size is 40 mm.
• Coefficient of filling the mesh net 3 mm% 35
• Material ratio 80 μm from the vibration isolator% 8
• Aggregate specific heat% 0.21 kcal / kg º C
• The production capacity includes the entire number of fillers collected from the filter and% 5 bits. the weight
• The material must be cubic in shape, and there should be no irregular shapes and foreign substances inside it.
• The production capacity can be adjusted depending on the ambient temperature options, i.e. ± 10%
Data sheet :
1.0 Cold Supply System
1.1. 4 x 12 m3 Aggregate material hopper
1.2. 4 things. Dosing conveyor (with frequency control, new geared motor)
1.3. 1 PC. Central feed conveyor (L: 16, 000 mm, W: 500 mm)
1.4. 1 Corner conveyor (L: 11, 500 mm, W: 500 mm)
1.5. 1 Vibrator (for bunker with sand)
2.0 Drying drum and burner.
2.1. Dryer drum
2.2. Fuel oil and diesel burner (Benninghoven Brand)
2.3. Fuel preheating (Benninghoven Brand, Electrical)
2.4. Unit temperature sensor
3.0 Filtration system
3.1. Cleaning system (rail type) (main unit)
3.2. Preliminary separator, main dust and gas channel
3.3. Outlet fan, chimney and dust collecting channel
3.4. Screw conveyors for fine and coarse filler
4.0 Vibrating screen, mixer
4.1 Hot lift
4.2 Shielding unit (4 sections)
4.3 Hoppers of the hot aggregate (4 sections)
4.4 Weighing cells and electronic weighing system
4.4.1 Aggregate weighing (Capacity: 1000 kg)
4.4.2 Weighing the filler (Capacity: 200 kg)
4.4.3 Weighing bitumen (capacity: 150 kg)
4.5 Mixer (Capacity: 1000 kg / batch)
4.6 Platforms and ladders
4.7 Pneumatic System Compressor
4.8 Control cabin and computer system
4.8.1 Control cab
4.8.2 Power and control panels
4.8.3 Fully computerized control system
5.0 Mineral additive storage and feed system.
5.1 1 bunker 30 m3 of filler
5.2 1 pcs. filler
5.2 1 pcs. Feeding screw conveyor (hopper-weigher)
6.0 Bitumen and thermal oil supply system.
6.1 A device for weighing bitumen
6.2 250.000 - kCal / hr Thermal oil heater
6.3 2 pieces 40 m³ Bitumen tank
6.4 1 pcs. 30 m³ Fuel tank
The plant is in excellent working order.
Major overhaul-service with replacement of the worn out spare parts is made.
|
